Stand fans are one of the most useful items in your home. Not only do they cool you down when it’s warm outside, but using a floor fan can also help reduce energy costs by circulating air throughout your house and feeling cooler than usual!
What if your electric fan stopped working? You might think that the only solution is to go out and buy a new pedestal fan, but it doesn’t have to be! Depending on what type of problem you’re experiencing with an electric fan, in this article, we will show how quick & easy some home repairs can actually solve all sorts of problems. Remember that these tips are not exclusive to standing fans but can also be applied to your box fan or ceiling fan. Just make sure to wear rubber gloves when working on your DIY repairs to keep things clean and safe.
Check the Circuit Breaker Panel
If you have a stand fan that won’t turn on even when plugged in, check to make sure there’s electricity running through the circuit. This means opening up your breaker panel and looking for any trips or breaks along the way. It is very important that you know which switch or circuit breaker panel has been activated so there are no future problems with power loss. If you have noticed that there is a breaker tripped, flip it back on and try turning your fan again. If this works, then everything should be fine!
Knowing what has caused your breaker to trip can help you fix the problem more quickly. Make sure there is not too much current flowing through any wires in its cord or if some objects have been knocked into them and are shorting out the circuit.
Check Your Power Outlet
It’s important to make sure the outlet you’re using for the fan is working by plugging in a receptacle tester. If you do not have a tester, you can use a small portable appliance or device to check the power output. If it doesn’t power up or gives an error message, there may be problems with your electric fan wiring, and it should be fixed.
Check the Fan Fuse
The thermal fuse is a safety device that prevents cheaper fan motors from catching fire. It can be replaced depending on the size and power of your particular model, so don’t worry! If your stand fan is not working, there’s a good chance that the fuse has melted and cut off power. Check for this inside the motor housing as well as near an exposed wire with some slack in order to avoid cutting anything else when looking around inside yourself! If you’re unsure whether or where one might be located, then consult the owner’s manual.
Clean The Fan
Persistently dirty fan blades or debris-filled ventilation systems can lead to problems such as slower cooling and even structural failure. Make sure you regularly clean out your system so that it operates at its peak potential!
If you have an air compressor, use it to make sure that all parts of your pedestal fan are clean, including the fan motor. If not, then get out the crevice tool and carefully remove any dirt from inside or around these areas so as to best prepare for future vacuuming sessions ahead! We recommend that you unplug your fan first and then use a vacuum cleaner or compressed air to remove all debris. Clean the grates with soap & water before removing them from their stand, which will help keep any dirt residue off of them when storing away for future uses! Pay attention to the area where fan blades connect with your motor and rear bearing. If grime is hard for you to remove, try using a mild detergent!
Check Your Power Cord
When you go to fix your pedestal fan, make sure that the cord isn’t damaged and check for loose connections. It’s also important that you check the plug prongs – if they’re bent, then this could result in an electrical shock when turned on!
The cords for your home appliances can often be a hassle, but if you need to replace just the plug and wire gauge of it, then all that’s necessary is going out shopping! Replacement wires are available at any store or hardware near you.
Grease the Motor
If you can hear the motor running but not the blades turning, then there’s a chance that they’re stuck. After you thoroughly clean your stand or table fan, you should try unscrewing the motor housing of your electric fans so you can see all of their electric parts. Use WD-40 to lubricate everything and make sure that there are no oil leaks before reinserting it back into place!
Call a Professional
Finally, if you have been experiencing any of the problems listed above and are not able to fix them on your own or with some helpful tips from our article, then it is best that professional help is sought.
Last Updated on