Making a stand fan to a wall fan is an easy and affordable way to get the most out of your cooling equipment. In this post, we’ll show you how to do it with a few simple steps. Keep reading for more information!
What you will need
In order to convert a stand fan into a wall fan, you will need a hammer drill, a pedestal fan, and a wall mount.
This will be used to create holes in the wall for the screws that will secure the wall mount.
A wall mount for stand fans is a type of support bracket that helps to secure the fan to a wall surface. There are several benefits to using a wall mount, including reducing the risk of tipping and providing stability during operation.
Once you have the first two covered, you are not ready to install your pedestal fan to wall. The pedestal fan will be attached to the wall mount, and the combination will act as a powerful wall fan. Finally, the wall mount will need to be secured to the wall with screws.
This project should take no more than an hour to complete, and it will result in a much more efficient way to cool your home.
Wall fans are more efficient than pedestal fans because they use less energy to operate. To convert a pedestal fan to a wall fan, follow these steps:
- Using a screwdriver, remove the base of the pedestal fan.
- Unscrew the neck of the pedestal fan from the motor housing.
- Cut two pieces of plywood that are slightly larger than the diameter of the motor housing.
- Screw one piece of plywood onto the back of the motor housing
- Attach the other piece of plywood to the wall using screws or nails
- Hang the motor housing on the plywood and screw it in place
- Reattach the neck of the pedestal fan to the motor housing
- Place the blades of the pedestal fan onto the motor shaft
- Screw on the blade cover and tighten it in place
- Test the pedestal fan by plugging it into an outlet and turning it on.
Once this is installed, it is also important to check whether the original switch will work with your new set-up. You can do this installation even with a really cheap pedestal fan
Tips and tricks
If you’re looking to add a bit of cooling to your home this summer, you may be considering installing a wall-mounted fan. While ceiling fans are a popular choice, wall-mounted fans offer several advantages. They’re easier to install, they take up less space, and they can be positioned to direct airflow exactly where you want it. Here are a few tips and tricks to help you install your wall-mounted fan:
1. Choose the right location. When selecting a spot for your fan, make sure it’s far enough away from any walls or furniture so that the blades won’t hit anything when they’re spinning. You’ll also want to make sure the outlet is nearby so you don’t have to run too many extension cords.
2. Mark the outline of the bracket. Once you’ve found the perfect spot, use a pencil or chalk to mark the outline of the bracket onto the wall. This will give you a reference point for drilling holes later on.
3. Drill pilot holes. Before attaching the bracket to the wall, drill pilot holes into the drywall at each of the marks you made in step two. These holes will make it easier to drive in the screws later on.
4. Attach the bracket. With the pilot holes in place, it’s time to attach the bracket to the wall using screws or nails. Be sure to use screws that are long enough to go through both the bracket and the drywall.
5. Hang the fan. Once the bracket is secured to the wall, simply hang your fan from it following the instructions that came with your particular model. In most cases, all you’ll need to do is insert a few screws into pre-drilled holes and tighten them down with a screwdriver or drill.
With these tips in mind, installing a wall-mounted fan is easy and only takes a few minutes. So beat the heat this summer and enjoy cool, comfortable air in your home by adding a fan!
Last Updated on